[523133] Zinc through bolt fischer FXA 10/10 M10 x 86

A more cost effective through bolt solution from fischer – with ETA approval for installation in non-cracked concrete. Installed with a few hammer blows into a pre-drilled hole. See installation instructions for details.

Applications

• Steel constructions

• Guard rails

• Consoles

• Ladders

• Cable trays

• Machines

• Staircases

• Gates

• Façades

Building materials

• Approved for:

• Concrete C20/25 to C50/60, non-cracked

• You can find detailed information on building materials in the registration document.

  
  

Permission

• ETA-13/0772

• DoP 0193

• DoP No. 0034

Functionality

• Functionality

• The FXA is suitable for pre-positioned and push through installation, also suitable for stand off installation under certain conditions.

• Prior to installation, place the hexagon nut in the optimal position (the drive-in pin projects by approx. 3 mm out of the hexagon nut).

• When applying the torque, the cone bolt is pulled into the expansion clip and expands it against the drill hole wall.

• The head embossing offers a simple control of the anchoring.