[40854] Zinc through bolt fischer FBN II 10/30 M10 x 106

The fischer bolt anchor FBN II is a steel anchor for cost-effective fixings in non-cracked concrete. Due to the long thread, the fischer bolt anchor FBN II can be used in a particularly flexible manner. The bolt anchor is also suitable for stand-off installation as well as pre-positioned and in push-through installation. The zinc-plated steel version of the bolt anchor is suitable for fixing railings, cable trays, and consoles in internal areas.

Applications

• Steel constructions

• Guard rails

• Consoles

• Ladders

• Machines

• Gates

• Façades

Building materials

• Approved for:

• Concrete C20/25 to C50/60, non-cracked

• Also suitable for:

• Concrete C12/15

• Natural stone with dense structure

• You can find detailed information on building materials in the registration document.

Permission

• ETA-07/0211

• DoP 0192

• DoP No. 0015

Functionality

• The FBN II is suitable for pre-positioned and push-through installation; also suitable for stand-off installation under certain conditions.

• Prior to installation, place the hexagon nut in the optimal position (the drive-in pin projects by approx. 3 mm out of the hexagon nut).

• When applying the torque, the cone bolt is pulled into the expansion clip and expands it against the drill hole wall.

• The head embossing offers a simple control of the anchoring.

• In the case of series installation, we recommend using the FABS bolt anchor setting tool.

Documents for download