CFCSMG concrete screw 8 x 40 / IM6 x 10 with internal metric thread zinc-plate TX50

This combination does not exist.

Female threaded concrete screw for various substrates. Female thread M6, M8, M10 in steel, zinc-plated.

Drill Hole Depth: 50mm

Embedment Depth: 40mm

Thread Length: 10mm

Size: 8mm

Thread Size: M6

Material: Zinc-plated

Drive Size: TX50

Unit of Measure Name: 100
Internal Reference: 11671

The Certifix CFCSMG female threaded screw for various substrates. Female thread M6, M8, M10 in steel, zinc-plated.

Easy Installation: Easy, fast and safe installation with a impact screwdriver. This makes overhead work in particular much easier.
Flush with surface: The flush surface installation results in a clean installation appearance without any interfering elements.
Internal thread: The practical internal thread enables use for a wide range of applications.
Demountable If required: The CFCSMG can be quickly and easily dismounted.
High load values: The special thread geometry ensures secure hold and high loads in concrete.
Small edge distances: Small edge distances and spacing allow particularly close-edge and closely spaced installation.

Approved for:
Concrete C20/25 to C50/60, cracked and non-cracked
Also suitable for:
Concrete C12/15
Concrete C80/95 (classification available)
You can find detailed information on building materials in the registration document.

Base Material: Approved for concrete strength classes from C20/25 to C50/60. Cracked and non-cracked concrete.
Suitable for masonry, aerated concrete and wood.